Contact US
PT.MAIRODI MANDIRI SEJAHTERA
Training, Consulting & Engineering Services
Gedung Dapenpos Lt.2 Jl.PH.H.Mustofa No.35 Bandung 40124
Telp/Fax:(022)7215668 atau (022)7215416
Mobile : 085860263043 atau 081322050262 atau 081809600076 atau 02272282252 atau 085222155409 atau 081809408069 atau 081809600074 atau 085794511464
training@mairodi-training.com ptmmsbdg@gmail.com
Wahyu

Deris

Aziz


Future Event
Clock Link
WE ALSO ORGANIZE TRAINING IN OTHER CITIES

KINEMATIKA DAN DINAMIKA MESIN (KINEMATICS AND DYNAMICS OF MACHINERIES)

Training Syllabus:

KINEMATIKA DAN DINAMIKA MESIN
(KINEMATICS AND DYNAMICS OF MACHINERIES)

 

PENDAHULUAN :

Kinematika adalah bagian dari mekanika yang mempelajari gerak suatu benda tanpa memandang gaya yang bekerja pada benda tersebut (massa benda diabaikan). Jadi jarak yang ditempuh benda selama geraknya hanya ditentukan oleh kecepatan dan atau percepatan. Bagian yang mempelajari bagaimana pengaruh lingkungan terhadap gerak disebut dinamika. Dalam perancangan elemen-elemen mesin, hal yang sangat vital dalam pertimbangan adalah menentukan beban-beban yang bekerja pada mesin tersebut. Untuk mesin yang bergerak lambat, gaya inersia yang bekerja memang sangat kecil dibandingkan gaya beratnya. Namun, untuk mesin-mesin yang bergerak sangat cepat, gaya-gaya dinamik yang bekerja perlu dipertimbangkan karena dengan mengetahui beban-beban yang bekerja kita dapat menentukan dimensi dan material yang akan kita pilih dalam proses perancangan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Kinematika dan Dinamika Mesin.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang kinematika dan dinamika pada industri rekayasa.

TUJUAN TRAINING

Setelah mengikuti training ini diharapkan peserta mendapatkan pemahaman tentang pengetahuan kinematika dan dinamika mesin.

CAKUPAN MATERI TRAINING :

  1. Basic of mechanisms.
  2. Kinematics degree of freedom, kinematics diagram, instantaneous pole of velocity, transmission ration,
  3. Graphical method of velocity analysis (velocity polygon), auxiliary point, acceleration analysis, complex method, rolling, and equivalent mechanisms.
  4. Static force analysis (free body diagram method, transmission ratio and translation radius method),
  5. Dynamic forces
  6. Kinetostatics
  7. Balancing of rotating machineries,
  8. Balancing of reciprocating machineries,
  9. Gyroscope, and flywheel.

INSTRUCTOR :    Ir. Sugeng Isdwiyanudi, MT.   and Team

 

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TRAINING TIME :

  1. 4 – 7 February 2013
  2. 29 April – 2 May 2013
  3. 24 – 27 July 2013
  4. 6 – 9 November 2013

INVESTATION PRICE/PERSON :

  1. Rp 7.500.000/person (full fare)  or
  2. Rp 7.250.000/person (early bird, payment 1 week before training) or
  3. Rp 6.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training

10. Qualified instructor

11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team 

He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Tagged with:
Posted in Maintenance, Mechanical, rotataing equipment, Technical & Engineering, vibration

Form Registrasi Training

DATA TRAINING
  1. (required)
  2. (required)
DATA PERSONAL
  1. (required)
  2. (required)
  3. (required)
  4. (valid email required)
  5. (required)
Data Pre Registrasi (Tidak Mengikat)
Pesan Untuk Penyelenggara Training
 

cforms contact form by delicious:days

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>